ELECTRICAL PANEL UPGRADES

Nowadays’s  gadgets and appliances easily overload electrical systems in many of today’s older homes, causing issues that could easily be prevented with a new electrical panel.

What is an electrical panel?

Your electrical panel helps provide electricity to the much-loved and well-used gadgets and appliances throughout your home. Power from your utility company flows into your home through this panel, where it branches out into major electrical branches, dwindling into smaller branches in order to distribute power. A properly functioning electrical panel is essential to the safety of your family and your home.

Where is the electrical panel in my home?

Electrical panels can be identified as a painted or gray metal box. They are typically mounted on the wall of your home in an easily accessible area such as a utility room, laundry room, garage, basement, or closet. However if you can’t find the electrical panel inside your home, it may be located outside.

Old electrical panels can result in a myriad of problems, including:

  • Flickering lights.
  • Breakers that constantly trip or fuses that frequently blow.
  • The need to turn off one appliance to use another.
  • Melted electrical wires.
  • Defective circuit breakers that fail to trip, resulting in shocks, overheating, and fire.
  • In short, old electrical panels result in danger to your family and property resulting from fire and electrical shock.

Is your home showing signs it is in need of a new electrical panel?

  • Crackling sounds from your panel box.
  • Corrosion or rust on the breakers or panel.
  • Overheating electrical service conductors.
  • Appliances running at less than full power.
  • Two pronged (non-grounded) outlets.
  • Your home is not equipped with GFCIs (ground fault circuit interrupters) in necessary areas.
  • You find yourself frequently seeking extension cords.
  • You need surge protectors to protect the appliances in your home.
  • Your home was built with, and still runs on, a 60 amp electrical service.
  • Your home uses a fuse block panel or split-buss panel (electrical panel with no main breaker).
  • The 100 amp electrical service in your home is insufficient for operating necessary appliances.

Other reasons you should consider a new electrical panel:

  • The renovation of your home, particularly the kitchen, which is appliance-heavy.
  • You are adding a home addition.
  • The addition of a major appliance, such as central heating and air, stoves, spas, garage power equipment, and more.
  • You need/are adding outlets to your home.
  • To meet homeowners insurance requirements.
  • You’re in need of a 240 volt circuit.
  • You need to add a sub panel.

1268361-close-up-shot-of-an-electrical-panel-wiring-with-color-coded-cables-357x276.jpgToday’s new electrical boards are all around planned and safe, however homes with boards introduced as of late as the 1980s may contain parts now known not weakened, getting to be dangerous with age and posturing security issues. On the off chance that you home uses any of these segments; have another electrical board introduced promptly

Federal Pacific Electric Electrical Panel

Made from the 1950s to 1980s, these panels have design and manufacturing flaws that can result in fires or shocks. According to the U.S. Consumer Product Safety Commission, the presence of this panel in a home is classified as a safety defect warranting a new electrical panel.

Zinsco Electrical Panel

Not manufactured since the mid-1970s, these panels have design flaws that allow power to flow even when the breakers appear off. Breakers may also melt preventing them from their essential function. Zinsco panels pose a fire and shock hazard and should be replaced with a new electrical panel.

Pushmatic Electrical Panel

These panels house weak breakers that become difficult to reset over time, necessitating a new electrical panel. They also have no main breaker to stop flow into the panel.

Fuse Box

Far older than any of the above panel types, fuse boxes are only designed to handle 30-60 amps of power, however today’s appliances require 100-200 amps of power or more. Not simply inconvenient, their well-outdated technology poses a huge fire and electrocution safety risk

Source: http://mrelectric.com/electrical-panel-upgrades

http://agnationalelectric.com/news/

http://fatimaelectricandsolar.com/residential-electrician/

SMC takes pride for making positive contribution to the society and shall continue doing so through conscientious business operation providing the most trustworthy, reliable, and creative design and build solutions. It also provides electrical renovation equipment. If you’re remodeling your home or business, contact SMC today for your consultation on the best and safest electrical service.Get more information on our website.

qr2

 

Advertisements

Published by

Shanghai Metal Corporation

As an integrated global manufacturer, supplier of metal related products and reliable services we dedicate this blog to manifest our interests on different topics that would surely brighten your mind everyday. Each article is suited for every types of reader because we value simplicity as the key to transmit messages. Follow us and stay updated ~! Visit our main website to learn more about us : http://www.shanghaimetal.com/ Our address : 20th Floor Yuan Mansion, 738 Dongfang Road, Shanghai, China 200122 Email : shanghaimetalcorp@gmail.com Skype : shanghaimetal Telephone : +86 21 6875 6127 Monday - Friday : 9am - 5pm Saturday & Sunday : Available by appointment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s